{"product_id":"ultra-bright-led-projection-logo-puddle-lights-for-tesla-cutim","title":"CUTIM Ultra-Bright LED Projection Logo Puddle Lights for Tesla | CUTIM","description":"\u003ch3 data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eMake a Grand Entrance Every Time\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"4\"\u003eElevate your Tesla experience from the moment you open the door. Our Ultra-Bright LED Puddle Lights replace the dim factory under-door lamps with high-definition, crisp Tesla \"T\" logo projections. Not only do they provide a sophisticated aesthetic, but they also offer superior illumination for the ground beneath your feet, helping you avoid puddles and debris in low-light conditions.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"5\"\u003e\u003cb data-path-to-node=\"5\" data-index-in-node=\"0\"\u003eWhy Choose CUTIM Projection Lights?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,0,0\"\u003e\u003cb data-path-to-node=\"6,0,0\" data-index-in-node=\"0\"\u003eHigh-Definition Quartz Glass Lens\u003c\/b\u003e: Unlike cheap plastic lenses that yellow and blur over time, we use multi-layer quartz glass. This ensures the logo remains sharp, vibrant, and distortion-free for years of use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,1,0\"\u003e\u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"0\"\u003ePlug-and-Play Simplicity\u003c\/b\u003e: No wiring, no splicing, and no drilling. Our lights are designed to be a direct 1:1 replacement for the OEM housing, utilizing the factory connector for a 2-minute installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,2,0\"\u003e\u003cb data-path-to-node=\"6,2,0\" data-index-in-node=\"0\"\u003eOverheat Protection\u003c\/b\u003e: Engineered with advanced aluminum heat-sink backing and an intelligent decoding chip to prevent the common \"window-drop\" errors associated with low-quality aftermarket lights.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eKey Features\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eUpgraded LED Architecture\u003c\/b\u003e: Utilizing high-efficiency CREE LED chips, these lights provide maximum brightness with minimal power consumption, ensuring they stay cool to the touch.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSeamless Interior Integration\u003c\/b\u003e: The housing is precision-molded to fit perfectly into the door panels of the Model 3, Y, S, and X without any gaps or rattling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEnhanced Safety\u003c\/b\u003e: The extra-wide light spread provides a much safer exit for passengers by clearly illuminating the curb and ground in total darkness.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\"\u003eGhost Shadow Effect\u003c\/b\u003e: The high-contrast projection creates a stunning \"floating\" logo effect on asphalt, concrete, or tile surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003e\u003cb data-path-to-node=\"9\" data-index-in-node=\"0\"\u003eHow to Install\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"10\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,0,0\"\u003e\u003cb data-path-to-node=\"10,0,0\" data-index-in-node=\"0\"\u003eStep 1: Pry Out the Original\u003c\/b\u003e: Use the provided plastic trim tool to gently pop out the factory light from the bottom of the door panel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,1,0\"\u003e\u003cb data-path-to-node=\"10,1,0\" data-index-in-node=\"0\"\u003eStep 2: Disconnect the Cable\u003c\/b\u003e: Press the small clip on the connector and pull the wire away from the old light.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,2,0\"\u003e\u003cb data-path-to-node=\"10,2,0\" data-index-in-node=\"0\"\u003eStep 3: Connect CUTIM Light\u003c\/b\u003e: Plug the factory cable into the new CUTIM LED projection light. You should hear a distinct \"click.\"\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,3,0\"\u003e\u003cb data-path-to-node=\"10,3,0\" data-index-in-node=\"0\"\u003eStep 4: Snap into Place\u003c\/b\u003e: Push the new light housing back into the door panel until it sits flush.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,4,0\"\u003e\u003cb data-path-to-node=\"10,4,0\" data-index-in-node=\"0\"\u003eStep 5: Test\u003c\/b\u003e: Open the door and enjoy your new high-definition entrance! (Repeat for other doors).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,0,0\"\u003e\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eMaterial\u003c\/b\u003e: High-Temperature Resistant ABS + Aluminum Heat Sink.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,1,0\"\u003e\u003cb data-path-to-node=\"12,1,0\" data-index-in-node=\"0\"\u003eLens\u003c\/b\u003e: 6-Layer Nano-Glass Lens (Fade-Resistant).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,2,0\"\u003e\u003cb data-path-to-node=\"12,2,0\" data-index-in-node=\"0\"\u003eLight Source\u003c\/b\u003e: CREE High-Power LED.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,3,0\"\u003e\u003cb data-path-to-node=\"12,3,0\" data-index-in-node=\"0\"\u003eVoltage\u003c\/b\u003e: 12V DC.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,4,0\"\u003e\u003cb data-path-to-node=\"12,4,0\" data-index-in-node=\"0\"\u003ePackage Options\u003c\/b\u003e: Available in sets of 2 or 4.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eCompatibility\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003eTesla Model 3 \/ Highland\u003c\/b\u003e: All Years.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,1,0\"\u003e\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003eTesla Model Y\u003c\/b\u003e: All Years.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,2,0\"\u003e\u003cb data-path-to-node=\"14,2,0\" data-index-in-node=\"0\"\u003eTesla Model S\u003c\/b\u003e: 2012 – 2026+.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,3,0\"\u003e\u003cb data-path-to-node=\"14,3,0\" data-index-in-node=\"0\"\u003eTesla Model X\u003c\/b\u003e: 2016 – 2026+.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eDisclaimer\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"16\"\u003eAll references to other companies or trademarks are for identification only. cutimauto.com is not affiliated with or endorsed by Tesla Inc.\u003c\/p\u003e","brand":"CUTIM. All Rights Reserved.","offers":[{"title":"Default Title","offer_id":44527182577775,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/6954\/2255\/files\/66d895b295e868c2e5efd2131b5b4bbb.webp?v=1770971085","url":"https:\/\/www.cutimauto.com\/products\/ultra-bright-led-projection-logo-puddle-lights-for-tesla-cutim","provider":"CUTIM","version":"1.0","type":"link"}